ProGps - Suntech ST400
Server port: | 21599 |
Parameter name | Description | Units |
---|---|---|
sw_ver | Number of the released Software Version |
|
model | 1: ST400 |
|
cell_id | Information of Cell ID |
|
mnc | Information of Mobile Network Code |
|
mcc | Information of Country Code |
|
rx_level | Information of RX Level |
|
lac | Information of Location Area Code |
|
ta | Information of Timing Advance |
|
online | 1, if the report is sent immediately; 0, if the report is sent from the memory |
|
pwr_int | Voltage level of Backup Battery |
V |
msg_no | Message number |
|
mode | 1: Normal Mode 2: Emergency Mode by GPRS Command 3: Emergency Mode by RF Command 4. Emergency Mode by Jammer Detection 5: Backup battery is under threshold 6: Carton Package is opened For ALT messages: 1 Alert for Jamming is Detected |
|
serial_no | Serial number of RF device which is in Emergency mode. | |
dev_type | Type of Device 0: Presence Check Device, Adjunct RF Device, Presence Keychain 1: Isca, Long Life Isca, Presence Check Device, V2 Long Life Isca 2: RF Searching Device, Radis Base Station, Searching Device for Drone 3: Tracking Device with RF, Trailer RF Device |
|
msg_type | Type of Message 0: Emergency Message with GPS coordinates 3: Emergency Message without GPS coordinates. |
|
lat | Latitude of RF Device which is in emergency mode 0.0 if RF device does not have GPS |
|
lon | Longitude of RF Device which is in emergency mode 0.0 if RF device does not have GPS |
|
box_stat | 0: Box is opened 1: Box is closed |
|
volt_rf_dev | Battery Voltage of RF Device which is in emergency mode. 0x0 represents 3.2 volts or less. 0xF represents fully charged. Otherwise each step has 0.0667 volts of difference. |
|
rssi | RSSI in dBm received from RF Device which is in emergency mode. -255 means RSSI is not available. |
dBm |